Axial flow fan vibrating screen

NegotiableUpdate on 07/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Mainly used for screening and wet filtration of dry powder or granular materials in industries such as abrasives and grinding materials, chemical, plastic, pharmaceutical, metallurgical, building materials, grain, fertilizer, and health food

Product Details

hostTo evaluate performance and usage:

Multi layer linear vibrating screen uses the principle of vibration motor excitation to make the material jump forward on the screen surface for linear motion, in order to match the screen mesh reasonably and achieve the purpose of screening. It is suitable for screening and filtering any material with a size of 0.074-5mm.

characteristic：

Compared with the shaking plate screen and electromagnetic vibration, this screening machine has the following characteristics:

1. High screening accuracy and large processing capacity

2. Simple structure and easy maintenance

3. Low energy consumption, low noise, good sealing, reduced dust pollution, and long lifespan of the screen mesh

4. Adopting dual horizontal vibration motors

SCSF series linear sieve specification parameter table Table III

model	Screen size(wide×long)	level	Power（KW）	Vibration frequency(r/min)	amplitude(mm)	External dimensions			Equipment weight(kg)
model	Screen size(wide×long)	level	Power（KW）	Vibration frequency(r/min)	amplitude(mm)	L	B	H	Equipment weight(kg)
SCSF-520	500×2000	1-3 4-6	2×0.37 2×0.55	960	3-6	2126-2258 2315-2441	866	940-1060 1120-1240	180-350 400-600
SCSF-525	500×2500	1-3 4-6	2×0.73 2×0.75			2626-2752 2815-2941	866	940-1060 1120-1240	200-360 420-650
SCSF-1020	1000×2000	1-3 4-6	2×0.75 2×1.1			2126-2258 2315-2441	1360	1040-1160 1210-1350	500-680 760-1300
SCSF-1025	1000×2500	1-3 4-6	2×0.75 2×1.5			2626-2752 2815-2941	1360	1040-1160 1210-1350	600-1000 1100-1400

Our company reserves the right to modify the above data. At the same time, it can be redesigned according to user needs.

A machine length B machine width C machine height D screen width E screen length H frame height

Structure and working principle:

The SCSF linear vibrating screen is mainly installed in a seated manner, and can also be installed in a suspended manner as needed. The vibrating screen consists of a screen body with a sieve mesh, two vibration motors, supporting springs, and a base. The two vibration motors are symmetrically installed on both sides of the screen body, and the motor shafts are parallel to each other at a certain angle to the lead line.

When two vibration motors with similar characteristics rotate in opposite directions, they achieve synchronous reverse rotation during the vibration caused by the excitation force. At this time, the inertial force generated by the eccentric mass in the plane where the two motor shafts are located cancels each other out. The force perpendicular to this plane can be synthesized into a periodic excitation force within the symmetry plane of the sieve body. Under this force, the sieve body will vibrate in a straight line at a certain angle to the horizontal line. After the material enters the sieve surface from the feeding end, it will be continuously thrown by the impulse transmitted by the sieve surface. During the process of falling back to the sieve surface, particles smaller than the sieve hole will fall through the sieve hole into the lower layer, thus achieving screening and classification.