BAT53-250W integrated explosion-proof floodlight BTC6150 floodlight

BAT53-250W integrated explosion-proof floodlight BTC6150 floodlight

1Classification of BAT52 integrated explosion-proof floodlights (based on the equipped light source):
1. Metal halide lamps (light source brands generally choose Shanghai Yaming and Philips)
BAT53-L70 explosion-proof floodlight
BAT53-L100 Explosion proof Projection Lamp
BAT53-L150 explosion-proof floodlight
BAT53-L250 Explosion proof Projection Lamp
BAT53-L400 explosion-proof floodlight
BAT53-L1000 explosion-proof floodlight
2. High pressure sodium lamp (light source brands generally choose Shanghai Yaming and Philips)
BAT53-N70 Explosion proof Flood Light
BAT53-N100 Explosion proof Flood Light
BAT53-N150 Explosion proof Flood Light
BAT53-N250 Explosion proof Flood Light
BAT53-N400 Explosion proof Flood Light
BAT53-N1000 Explosion proof Flood Light
IIBAT53-250W integrated explosion-proof floodlight BTC6150 floodlightScope of application:
1. Explosive gas environment in Zone 1 and Zone 2.
2. Dust hazardous areas in zones 20, 21, and 22.
3. Can be equipped with high-pressure sodium lamps and metal halide lamps.

3、 Main technical parameters:
1. Rated voltage: 220V/50Hz
2. Rated power: 150~1000W
3. Lamp holder specification: E40
4. Inlet thread: G3/4
5. Cable outer diameter: 10-14mm
6. Protection level: IP55
7. Anti corrosion grade: WF1
8. Explosion proof mark: Exd IIB T3 or Exde IIC T3

4、 Product features:
1. Aluminum alloy shell, die cast, surface sprayed.
2. The shell is equipped with heat sinks, which have good heat dissipation effect.
3. The lamp body can rotate horizontally 360 ° and the elevation angle can be adjusted within+90 ° to -60 °.
4. The reflector adopts a parabolic shape with high reflectivity.
5. The transparent cover is made of tempered glass that is resistant to high-energy impact and has good transparency.
6. When opening the cover, simply loosen 1/3 of the bolt and then rotate the cover clockwise by 10 ° to open it, which can achieve the effect of not losing the bolt and quickly opening the cover.
7. All exposed fasteners are made of stainless steel material.
8. Cable routing.
9. Meets the requirements of GB3836-2000, IEC60079, GB12476.1-2000, and IEC61241 standards.