Baohua BAUER300-TE Air Breathing Inflator Pump Two Inflator Head Air Compressor

Baohua BAUER300-TE Air Breathing Inflator Pump Two Inflator Head Air Compressor【 186 Ma 6019 Ke 6936 】 is a professional breathing air filling equipment designed specifically for high-pressure environments

1Baohua BAUER300-TE Air Breathing Inflator Pump Two Inflator Head Air CompressorCore Technology and Performance Parameters

compression system

displacement300 L/min (standard state), can fill a 10L gas cylinder to 300 bar within 10 minutes.

work pressure225 bar (default)/330 bar (optional upgrade module), meeting the high pressure requirements of firefighting, diving and other scenarios.

Three level compression designAdopting a splash lubrication system and equipped with wear-resistant special plastic piston rings (last stage), ensuring stability and ultra long service life in high-pressure environments (design life exceeding 30000 hours)

efficient coolingThe final stage adopts Dan-K ü hl cooling technology, and both the intermediate and final stage coolers are made of stainless steel, which has excellent corrosion resistance and is suitable for harsh environments such as ships and fields

Inflatable capacity：

Drive and power supply

Three phase motor drivePower of 7.5 kW, voltage of 380V/50Hz, in compliance with industrial electricity standards.

intelligent controlOptional PLC control system, supporting automatic inflation, pressure setting, fault diagnosis, and remote monitoring, with Chinese LCD display screen.

Filtering and Security

Final safety valve (automatic overpressure relief), motor overheating protection, reverse protection (preventing motor reversal).

Shock resistant pressure gauge (0~400 bar dual scale) and explosion-proof electrical interface (optional).

P21Triple purification (activated carbon, molecular sieve, carbon monoxide absorbing molecules) with a processing capacity of 140 m ³, in compliance with DIN EN 12021 respiratory air standards.

P42New SUCURUS filter monitoring system has been added, which can monitor the saturation level of the filter in real time and automatically shut down if it exceeds the limit.

2、 Structural Design and Portability

compact body

size1100 × 520 × 570 mm, weighing 140 kg, equipped with a transport handle, can be easily loaded into the trunk of a small truck or SUV.

Tilt toleranceIntegrated low-pressure oil pump, allowing up to 30 ° tilt, suitable for non horizontal installation scenarios such as ships

Humanized configuration

Dual inflation interface (optional)Can simultaneously inflate 2 gas cylinders, filling 2 6.8L gas cylinders only takes 15 minutes, improving efficiency.

Automatic sewage system (optional)Automatically discharge condensate water every 15 minutes to reduce manual operation errors.

B-TIMER electronic monitor (optional)Record the running time, remind the filter replacement and maintenance cycle, and avoid safety hazards caused by negligence.

3、 Application Fields and Typical Cases

professional scenario

Fire and RescueProvide breathing air that meets EN12021 standards for SCBA (positive pressure air breathing apparatus). For example, in a city fire in 2025, BAUER 300-TE filled 50 gas cylinders within 30 minutes to ensure rescue continuity.

Diving and Underwater OperationsSupport 330 bar high-pressure inflation, compatible with various types of diving gas cylinders, certified by CE and classification societies (such as DNV, GL)

Industrial and Special OperationsHigh pressure gas supply in the petrochemical and aerospace fields, as well as clean air supplementation in medical laboratories.

Emergency support

It can be quickly deployed as a mobile gas supply station in disasters such as earthquakes and floods, driven by an onboard power supply or gasoline engine (additional configuration required).

4、 Key points of operation and maintenance

Start and Run

Installation requirementsHorizontal placement (tilt ≤ 5 °), ensure that the air inlet is free of dust, oil, and carbon monoxide concentration ≤ 25 ppm.

startup processAfter checking the oil level (recommended to use BAUER N28355 synthetic oil), belt tension (V-belt applies 5kg pressure offset ≤ 5mm), and filter status, start manually or automatically.

routine maintenance

P21 filter element: Replace every 50 hours or 1 year (whichever comes first).

Activated carbon filter: Replace every 40 hours or when there is an odor.

Oil level checkConfirm that the oil level is within the scale range before each use, and change the oil every 100 hours or when the season changes.

filter replacement：

Condensate dischargeIn manual mode, discharge once every 10-20 minutes, and in automatic mode (optional), unmanned operation can be achieved.