Campus access control swing gate system

RNCF 8008LCampus access control swing gate system

Standard product features:

1) Equipped with fault self checking and alarm prompt functions, convenient for users to maintain and use;

2) Programmable device operation status through the built-in small press pad on the main control board;

3) The mechanical structure has anti pinch and anti collision functions. When the swing arm encounters resistance during the reset process, the motor will automatically stop working within the specified time, and will reset again after a default delay (until reset) with minimal force (≤ 2Kg);

4) The anti-collision function automatically locks the swing arm when no opening signal is received;

5) Adjustable arm synchronization (for double swing situations);

6) It has an automatic reset function. If the gate is opened and the user does not pass within the specified time, the system will automatically cancel the user's permission to pass this time;

7) Adjustable normally open or normally closed to meet the requirements of different venues;

8) Can be connected to various card reading devices and receive relay switch signals for operation;

9) Unidirectional and bidirectional swing function, capable of controlling personnel entry and exit in one or both directions;

10) Remote control and management can be achieved directly through the management computer;

11) Delay automatic reset, with a standard of automatic reset within 5 seconds after activation;

12) The power-off swing arm automatically swings open and the power on swing arm automatically closes, meeting fire safety requirements.

2.2 Scalable Features:

1) Sound and light alarm functions, including illegal intrusion alarm, anti pinch alarm, etc;

2) Counting function;

3) Infrared reset function;

4) Extended chassis, extended swing arm, etc.

RNCF 8008LCampus access control swing gate system

Technical Specifications

○ Structure: Frame structure/Stainless steel shell

○ Chassis material: Domestic standard 304 stainless steel

○ Working voltage: AC220 ± 10% V 50 ± 10% HZ

○ Drive motor: DC24V DC brushed motor

○ Dimensions: 1200mm (length) * 280mm (width) * 1000mm (height)

○ Arm length: 530-830mm outside the chassis

○ Swing arm transmission angle: 180 degrees

○ Swing direction: unidirectional or bidirectional

○ Working environment: Indoor and outdoor (shade shed) -10 ℃~70 ℃ Relative humidity: ≤ 90%, no condensation

○ Gate opening and closing time: 1-2 seconds

○ Traffic speed: 40 people/minute (normally open), 25-30 people/minute (normally closed)

○ Time required to enter traffic mode after power on: 3 seconds

Normal service life: 3 million cycles

○ Communication interface: Standard RS485 interface, distance ≤ 1200 meters

○ Input interface: Relay switch signal or 12V level signal or 12V pulse signal with pulse width>100ms, driving current>10mA