-
E-mail
aozhiqiang@vip.sina.com
-
Phone
13801113537
-
Address
No.1 Huayuan Yili Jia, Taipingqiao, Fengtai District, Beijing
Product Categories
Beijing Aozhiqiang Electronic Technology Co., Ltd
Cold metal photodetector
NegotiableUpdate on 02/21
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The cold metal photodetector NT100 is a high-power CMD that is suitable for various harsh working environments, even in environments where ordinary photoelectric switches cannot handle dust, water mist, and other harsh conditions.
Product Details
Cold metal photodetectorThe main features of NT100 are:
Small in size, but with a considerable detection range. NT100 is a type of photoelectric detector with a detection range of 100 meters
Equipped with three levels of light intensity indicator lights, operators can use different colored indicator lights to determine the working status of the detector and detect faults in a timely manner When the green light of the third level light intensity indicator is on, it indicates that the luminous intensity received by the receiving end is 8 times higher than the required light intensity for normal operation. Note: The inherent emission intensity of the transmitting end is 10 times the required normal operating intensity threshold When the received light intensity is greater than 4 times the normal working light intensity threshold, the yellow light intensity indicator light will turn on When the received light intensity is greater than twice the normal working light intensity threshold, another yellow light intensity indicator will light up.
The transmitter is integrated with a luminous intensity monitoring circuit, which will output an alarm signal if the transmitter malfunctions
The working mode can be selected by switching between light in or light blocking.
The protection standards for galvanized shells are compatible with German standards.
Cold metal photodetectorNT100 Technical Specifications
Detection method: Shooting method
Detection distance: 100m
Detector object: diameter greater than 28mm
Working power supply: 12-24VDC ± 10%
Current loss: transmitting end: less than 30mA/receiving end: less than 35mA
Output mode: NPN collector open circuit
Working mode: switchable between light input/shading working mode
Response time: 5ms
Light source: Infrared LED (wavelength 910nm)
Indicator light: transmitter end P.L: power indicator light (green LED)
OP. L: Monitor indicator light (red LED)
Receiver: 0P. L working indicator light (red LED)
Light intensity indicator light: (three-level light intensity indicator)
LEVEL1: Yellow LED, lights up when the light intensity is twice the margin
LEVEL2: Yellow LED, lights up when the light intensity is at a margin of 4
LEVEL3: Green LED, lights up when the light intensity is 8 levels
Switch: Switching between light input/shading operation (requires opening the receiving end panel during operation)
Shell material: galvanized cast iron shell
Connection method: Terminal block method
Weight: Launch 800g， Accepted: 800g
Attachment: Operation Manual and Installation Bracket
