-
E-mail
aozhiqiang@vip.sina.com
-
Phone
13801113537
-
Address
No.1 Huayuan Yili Jia, Taipingqiao, Fengtai District, Beijing
Product Categories
Beijing Aozhiqiang Electronic Technology Co., Ltd
TAKEX Industrial Safety Light Wall
NegotiableUpdate on 02/21
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The TAKEX industrial safety light wall utilizes a sequential array scanning method for the light curtain. Metal casing makes it suitable for harsh environments. According to the needs, 5 types of optical axis gap models can be selected, which has opened up a wider range of application fields.
Product Details
Product Introduction:
Beijing Aozhiqiang Agency Japan Bamboo Middle SchoolTAKEX Industrial Safety Light Wall
The characteristic of MST light curtain is that it has two signal output modes. 1. Each optical axis outputs independently. 2. Based on the number of occlusions on the optical axis, provide 1-7V
The analog output. Users can fully utilize these two different output methods to complete different tasks on automated production lines. For example, utilizing
Simulate the output method to complete the deletion and selection of postal or express packages. Tools that utilize independent output control to perform sorting, etc. Another thing is to set up detection
Area, or block some detection areas, etc.
TAKEX Industrial Safety Light WallFeatures:
Two output modes are available for selection.
One output method iseachThe optical axis can output independently. The output mode is NPN with open collectorOutput method. inThere are certain obstacles in the detection area
When,It is easy to ignore the presence of obstacles.
2.Analog output mode. The output signal is a DC voltage of 1-7V. Its size varies with the number of optical axes involvedLinear variation.Namely: MST light curtain can be switched and selected
Working mode of entering or blocking light.
The size of the analog output andThe number of optical axes receiving light or the number of optical axes obstructed by light is linear. The detection distance is less than 10 meters.The adjustment of the optical axis is very simple.
The transmitting end adopts fully synchronous scanning.
Taking MST112 as an example. 12 optical axes, with a spacing of 40mm between them. The detection distance is 10 meters The width is 440mm. Each optical axis can be set to output independently, or
Output in an analog manner, producing an analog voltage proportional to the width of the detected object. Resolution greater than 60mm
The working voltage is 12V-24VDC, and the current consumption varies according to the number of optical axes. The current consumption of MST112 is less than 80mA
