Electrophoretic transfer printing system

The internal glass cooling base of the electrophoretic transfer printing system is equipped with a safety cover with a cable to control the temperature during the electrophoresis process.
2. The gel support transfer clip can be easily clipped into the tank, and a mixing rod is installed below it.
During the electrophoresis process, the buffer solution can be circulated and heat exchange can be carried out sufficiently.
4. Install platinum wires in the grooves of the electrophoresis tank panel to ensure safety.
5. The gel support with hinges in the electrophoretic transfer system, the gel and the hybrid membrane are in close contact, and there are fiber pads on both sides (standard configuration).
6. Platinum wire can be additionally equipped with gel holder transfer clip (GelCassette)

EBX-700 （4 place）
1. Tank with mixing rod
2. Four refrigeration modules
3. Platinum electrode wire/plate
4. gel support transfer clip+sponge pad
5. Sponge pad
6. Safety cover with cable

EBU-204 （4 place）
1. Tank body with stirring rod, with cooling base inside for temperature control
2. Two platinum electrodes
3. gel support transfer clip+sponge pad
4. Safety cover with cable
5. Adapter

EBU-402 （2 place）
1. Tank body with stirring rod, with cooling base inside for temperature control
2. Electrode plate - Platinum electrode wire embedded in plate slot
3. gel support transfer clip+sponge pad
4. Safety cover with cable
5. Adapter

EBU-302 （2 place）
1. Tank body with stirring rod, with cooling base inside for temperature control
2. Electrode plate - Platinum electrode wire embedded in plate slot
3. gel support transfer clip+sponge pad
4. Safety cover with cable
5. Adapter

EBU-102 （3 place）
1. Tank body with stirring rod, with cooling base inside for temperature control
2. Electrode plate - Platinum electrode wire embedded in plate slot
3. gel support transfer clip+sponge pad
4. Safety cover with cable
5. Adapter

◆Northern Blotting◆Southern Blotting◆Western Blotting