IIIC stainless steel on-site explosion-proof control box

NegotiableUpdate on 02/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The electrical components (including circuit breakers, contactors, thermal relays, control switches, buttons, relays, etc.) equipped in the IIIC stainless steel on-site explosion-proof control box should be selected from Siemens, Schneider, ABB brand products, and ultimately selected by the buyer. It should have dust-proof and waterproof performance, with a protection level of not less than IP54 indoors and not less than IP67 outdoors. There must be fixed and sturdy label boxes and machine printed labels below the control box, cabinet's air switches, indicator lights, buttons, rotary switches, and other operation and control and indication components.

Product Details

Box material, material thickness

(mm)

Waterproof box made of 304 stainless steel 1.5mm

Waterproof box made of 304 stainless steel 2.0mm

IIB explosion-proof box made of 304 stainless steel 3.0mm

IIC explosion-proof box made of 304 stainless steel 3.0mm

Waterproof box made of 316 stainless steel 1.5mm

Waterproof box made of 316 stainless steel 2.0mm

IIB explosion-proof box 316 stainless steel 3.0mm

IIC explosion-proof box 316 stainless steel 3.0mm

Waterproof box iron 2.0mm

IIB explosion-proof box iron 4.0mm

IIB explosion-proof box iron 6.0mm

IIC explosion-proof box iron

IIIC stainless steel on-site explosion-proof control boxThe on-site environment of the maintenance boxes in the smelting workshop, pouring workshop, and finishing workshop is harsh, with high smoke and high ambient temperature, which can cause high temperatures and dust accumulation in the maintenance boxes, especially on the first, second, and third floors. In summer, the ambient temperature can reach 50-75 ℃, and nanoscale dust will accumulate in the maintenance boxes in large quantities. The high temperature near the furnace door will damage the electrical appliances on the surface of the maintenance boxes. Therefore, the box surface and equipment on the box surface should also be resistant to high temperatures.

6、 Scope of Supply

1. The second party shall ensure the completeness of the supply scope and meet the requirements of the first party for the installation, commissioning, operation, and performance of the products.

2. Require Party B to provide technical services and cooperation related to product installation, commissioning, and operation, and arrange technical personnel to guide the installation and commissioning of equipment on site.

1. Maintenance power box 500x400x300, furnace pounding machine distribution box 500x400x25, lighting distribution box 500x600x200

IIIC stainless steel on-site explosion-proof control boxexecution standard

The control console should comply with the following electrical and electrical product standards, as well as packaging, transportation, and storage standards:

GB7251.12-2013 Low voltage switchgear and control equipment - Part 2: Complete sets of power switchgear and control equipment

GB/T 7251.10-2014 Low voltage switchgear and control gear - Part 10: Guidelines for specifying complete sets of equipment

GB50058-2014 Code for Design of Electric Power Installations in Explosive and Fire Hazardous Environments

GB7251.1-2013 Low voltage switchgear and control equipment - Part 1: General principles

DL/T 5137-2001 Technical Code for Design of Electrical Measurement and Energy Metering Devices

GB/T 4208-2017 Degrees of Protection Provided by Enclosures (IP Code)