-
E-mail
2880635307@qq.com
-
Phone
18860995252
-
Address
ASEAN Industrial Park, Nanzha Town, Jiangyin, Jiangsu
Product Categories
- AMC series programmable electrical measuring instruments
- ADL rail type multifunctional electric energy meter
- ARTU series three remote units
- ALP intelligent low-voltage line protection device
- ACR series network power meter
- ARTM Electrical Contact Online Temperature Measurement Device
- ARD intelligent motor protector
- ARD shaking power restart controller
- Intelligent BA series current sensor
- APM series network power meter
Jiangsu Ankerui Electric Appliance Manufacturing Co., Ltd
Installation of wireless temperature sensor induction power supply alloy sheet
NegotiableUpdate on 02/11
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The electrical contact online temperature measurement device is suitable for temperature monitoring of cable joints, circuit breaker contacts, knife switch, high-voltage cable intermediate heads, dry-type transformers, low-voltage high current and other equipment in high and low voltage switchgear. It prevents excessive contact resistance caused by oxidation, looseness, dust and other factors during operation, which can cause heating and become a safety hazard, improve equipment safety guarantee, timely, continuously and accurately reflect equipment operation status, and reduce equipment accident rate. Installation of wireless temperature sensor induction power supply alloy sheet
Product Details
1. Overview
The online temperature monitoring system for switchgear is a system developed based on 470MHz wireless temperature measurement technology for temperature measurement of switchgear. It can monitor the temperature of various parts of the switchgear, such as busbar, upper and lower contacts, cable joints, and cabinet surface, in real time, making it convenient for operation and maintenance personnel and remote monitoring centers to grasp the operation of on-site equipment.Installation of wireless temperature sensor induction power supply alloy sheet
2. Application location
Substation, distribution room, box transformer, etc
3. System architecture
The wireless temperature measurement system for switchgear consists of three parts: wireless temperature sensors, temperature measurement communication terminals (temperature display devices), and temperature monitoring and warning workstations,Installation of wireless temperature sensor induction power supply alloy sheet
4. System functions
Temperature query: Temperature history curve (1 minute, 5 minutes, 60 minutes optional):
Operation report: query the operating temperature report of each circuit equipment.
Real time alarm: Wall mounted wireless temperature monitoring equipment has real-time alarm function, and the device can issue warnings for events such as temperature exceeding the limit.
Fixed value setting: used to modify high temperature and over temperature settings.
WEB， Mobile APP (optional): Display overview information such as the number of substations, transformers, monitoring points, equipment temperature, communication status, electricity analysis, and event records through web pages and mobile APP display pages.
5. Product selection
5.1 Selection of Wireless Temperature Sensor
name |
appearance |
Parameter Description |
Installation method |
|
ATE100M Magnetic sensor |
|
32.4 * 32.4 * 16mm (length * width * height); -50 ℃~+125 ℃, accuracy ± 1 ℃, battery powered, lifespan ≥ 5 years; 470MHz， An open distance of 150 meters. |
Magnetic attachment |
|
ATE100 Bolt type sensor |
|
62.4 * 32.4 * 16mm, with a diameter of 13.5mm (length * width * height, aperture); -50 ℃~+125 ℃, accuracy ± 1 ℃, battery powered, lifespan ≥ 5 years; 470MHz， An open distance of 150 meters. |
bolt fixing |
|
ATE200TB Strap style sensor |
|
35 * 35 * 17mm, L=330mm (length * width * height, strap); -50 ℃~+125 ℃, accuracy ± 1 ℃, battery powered, lifespan ≥ 5 years; 470MHz， An open distance of 150 meters. |
Strap binding |
|
ATE100P Outdoor bolt type sensor |
|
62.4 * 32.4 * 16mm, with a diameter of 13.5mm (length * width * height, aperture); -50 ℃~+150 ℃, accuracy ± 0.5 ℃, battery powered, lifespan ≥ 5 years; 470MHz， An open distance of 150 meters; Protection level IP68. |
Outdoor bolt fixation |
|
ATE200P Outdoor strap sensor |
|
35 * 35 * 17mm, L=330mm (length * width * height, strap); -50 ℃~+150 ℃, accuracy ± 0.5 ℃, battery powered, lifespan ≥ 5 years; 470MHz， An open distance of 150 meters; Protection level IP68. |
Outdoor strap binding |
|
ATE400TB Passive sensors |
|
25.82 * 20.42 * 12.8mm (length * width * height); -50 ℃~+125 ℃, accuracy ± 1 ℃, CT induction power supply, starting current ≥ 5A; 470MHz, open distance of 150 meters. |
Alloy sheet fixation and power supply |
Pt100 |
|
It is recommended to purchase it externally for low voltage contact temperature measurement. Please contact the supplier for specific packaging, accuracy, wire system, wire length, and specifications; When used for temperature measurement of transformer or motor windings, it is recommended to embed Pt100 inside the transformer or motor. |
According to the packaging decision |
5.2 Selection of transceivers
name |
appearance |
Parameter Description |
Installation method |
|
ATC450-C Sensor signal receiver |
|
65 * 45 * 28mm (length * width * height); DC24V power supply; One upstream RS485 interface, capable of receiving temperatures from 60 ATE100/ATE100M/ATE200/ATE400/ATE100P/ATE200P wireless temperature sensors; Modbus protocol. |
35mm guide rail installation screw fixation (φ 4,36mm) |
|
ATC600TB Sensor signal receiver |
|
90 * 90 * 38mm (length * width * height); AC/DC 85-265V power supply; One upstream RS485 interface, capable of receiving temperatures from 240 ATE100/ATE100M/ATE200/ATE400/ATE100P/ATE200P wireless temperature sensors; Modbus protocol. |
35mm rail installation |
5.3 Temperature measurement communication terminal (temperature display device,High voltage copper bar temperature measuring instrument）Selection
name |
appearance |
Parameter Description |
Installation method |
|
ARTM-Pn Wireless temperature measurement instrument display |
|
Face frame 96 * 96 * 17mm, depth 65mm, opening 92 * 92mm, powered by AC85-265V or DC100-300V; One way up RS485 interface; Can receive 60 ATE100M/100/200/400/ATE100P/ATE200P wireless temperature sensors (compatible with ATC450); Modbus protocol. |
Embedded installation with panel openings |
|
ASD300/320 Switchgear control device with wireless temperature measurement |
|
Surface frame 237.5 * 177.5 * 15.3mm, depth 67mm, opening 220 * 165mm; powered by AC85-265V or DC100-300V; One way up RS485 interface; Can receive temperatures from 12 ATE100M/100/200/400 wireless temperature sensors (compatible with ATC450); Modbus protocol. |
Embedded installation with panel openings |
|
ATP007 Wireless temperature measurement touch screen display |
|
Face frame 226.5 * 163 * 6mm, depth 70mm; opening 215 * 152mm; DC24V power supply; One upstream RS485 interface and one downstream RS485 interface; Can receive 4 ATC450-C or 1 ATC600. |
Embedded installation with panel openings |
ARTM-8 |
|
Face frame 96 * 96 * 12.5mm, depth 70mm, opening 88 * 88mm; one upstream RS485 interface, can connect 8 Pt100 temperature sensors; Modbus protocol |
Embedded installation with panel openings |
Acrel-2000T/A wireless temperature measurement on-site centralized display |
|
Cabinet size 480 * 420 * 200mm; powered by DC220V; One upstream RS485 interface, one downstream RS485 interface, and one Ethernet port; Can receive 4 ATC450-C or 1 ATC600. |
wall-mounted installation |
Acrel-2000T/B wireless temperature measurement on-site centralized display |
|
The cabinet size is 480 * 420 * 200mm; hardware: 4GB memory, 128GB hard drive, Ethernet port; Display: 12 inches, resolution 800 * 600; Operating System: Windows 7; Database system: Microsoft SQL Server 2008 R2; I/O interfaces: GLAN × 2, USB × 4, COM × 6; Optional web platform/APP server |
wall-mounted installation |
Similar Product Recommend
