Lubcon grease LP 5002 STR biodegradability

Lubcon grease LP 5002 STR biodegradability

Biodegradability: Meets the OECD 301F standard, with a biodegradation rate of 78% within 28 days, meeting the environmental requirements of industries such as food processing and pharmaceuticals.

Non toxic certification: Through NSF H1 certification, it can indirectly come into contact with food and is widely used in the sterile valve group of beverage filling machines.

Nanoscale additive system: performance enhancement at the microscale

LPE 552/TT LS 752 constructed a multi-level lubrication mechanism by adding nano-sized molybdenum disulfide (MoS ₂) and polytetrafluoroethylene (PTFE) particles:

Solid lubricating layer: Nano MoS ₂ forms a low shear strength transfer film on the friction surface, converting sliding friction into rolling friction and reducing the friction coefficient by 40%.

Self repair effect: PTFE particles fill micro pits in the worn area, forming a dynamic repair layer.

In the bench test of the wind turbine gearbox, the lubricating grease reduced the tooth surface wear rate by 65% and extended the equipment maintenance cycle to 5 years.

Model:

ULTRATHERM 2000

Lubrication device QUATTROMAX 30EXT

Automatic lubricator DuoMax 160

K3000W.5L

TURMSILION K3000W

TRUMSILION K3000 W H1

Oil injector DUOMAX 160

Core advantage: Performance indicators that exceed standards

Temperature adaptability

Low temperature start-up performance: At -40 ℃, the apparent viscosity of this grease is less than 5000mPa · s, ensuring a 60% reduction in cold start torque for wind turbine yaw bearings in cold regions.

High temperature stability: According to the high temperature life test of DIN 51818 standard, after continuous operation for 1000 hours at 200 ℃, the cone penetration change value is ≤ 10 (0.1mm), which is much better than the ≥ 30 standard of ordinary lithium grease.

Long lifespan and low maintenance

Oxidation induction period (OIT): According to differential scanning calorimetry (DSC) testing, the oxidation induction period of this grease is 320 minutes, which is four times that of ordinary grease and can significantly prolong the grease change cycle.

Mechanical stability: In SKF R2F testing, after 100000 double stroke shearing cycles, the change in cone penetration is only 8 (0.1mm), ensuring long-term stability in strong vibration equipment such as vibrating screens and crushers.

Environmental Protection and Safety

Lubcon grease LP 5002 STR biodegradability