Ozone concentration detector

Gas detection:

Ozone O3

Detection Principle:

Principles of electrochemistry

Detection method:

Fixed online long-term continuous detection, diffusion based detection method;

Fixed online continuous detection, using an external air pump to achieve pump suction flow detection (optional air pump);

Installation method:

Wall mounted, pipelineIntegrated (Pipe type external thread specification: M45X1.5mm, optional pipe adapter screw joint, weldable)

Measurement range:

0-1ppm、5ppm、20ppm、50ppm、100ppm、200ppm、500ppm、2000ppm、5000ppm、10000ppm、30000ppm

(The measurement range is optional and not adjustable at the factory)

resolving power:

0.001ppm（0-1ppm）、0.01ppm（0-100ppm）、0.1ppm（0-1000ppm）、1ppm（1000ppm Above)

Accuracy:

≤± 3% FS (actual concentration, higher accuracy requirements depending on sensor performance)

Operation method:

Infrared remote control for remote and close range operation, convenient setup

Repeatability:

≤±3%

Zero drift:

≤± 1% (F.S/year)

Response time:

≤ 30 seconds (T90)

Recovery time:

≤ 30 seconds

Explosion proof mark:

Exd II CT6

Protection level:

IP66

Output signal:

Users can choose according to their actual on-site environmental needs, with a maximum transmission distance of 2000 meters (single core 1mm2 shielded cable)

Three wire 4-20mA current signal output, can be connected to various control systems such as alarm controllers, PLCs, DCS, etc. (standard configuration)

Digital signal RS-485 output,ModBus RTU communication protocol（Optional features)

Frequency signal 200~1000Hz output (optional function)

Two sets of relay outputs: passive electric shock capacity 220VAC 0.5A or 5VDC 0.5A

Remote transmission and status alarm of detection data can be achieved through wireless module function (optional function); Can achieve Ethernet access

Main material

Shell: ADC12 aluminum alloy, sturdy, wear-resistant and corrosion-resistant (batch can choose 316 stainless steel shell)

Gas chamber: Made of high-strength, wear-resistant, and corrosion-resistant aluminum profiles, sturdy and durable (316 stainless steel gas chambers can be optionally selected for batches)

Operating Temperature

-30 ℃~+60 ℃ (customized for special requirements)

Working humidity:

≤95%RH， No condensation (humidity>90% RH, condensation can be equipped with a filter)

relative humidity

10%～95%RH

Power supply:

24VDC (normal operating voltage range 12-30VDC)

Power consumption:

1.5W

working pressure:

≤200Kpa

Size:

180mm * 140mm * 92mm (height * width * thickness)

Weight:

About 1.6Kg

Execution standard:

GB15322.1-2003，GB3836.1-2010，GB3836.2-2010，GB3836.4-2010

Standard configuration:

Host, remote control, packaging box, manual, warranty card/certificate of conformity

*：

The whole machine comes with a one-year warranty and free maintenance during the warranty period.