Photovoltaic smoke tester, smoke and fire recognition sensor, alarm

Photovoltaic smoke tester, smoke and fire recognition sensor, alarm

I. Overview

JTY-GF-TX3101A(K)The point type photoelectric smoke fire detector (hereinafter referred to as the detector) is a non coding detector. This product is equipped with a high-performance and highly integrated microprocessor, embedded with intelligent software algorithms, for real-time analysis and judgment of data collected by infrared smoke sensors, and monitoring of smoke concentration in the surrounding environment. This product has a beautiful exterior design and is easy and reliable to install. It can be used with our corresponding fire alarm controllers and module products, and is suitable for hotels, restaurants, computer rooms, banks, shopping malls, warehouses, cabinets, libraries, office buildings, and other places.

2、 Characteristics

1Bidirectional scattering technology, low false alarm rate

2Fully integrated chip design, stable performance

3Low monitoring current

4Non coding design with switch normally open and normally closed output

5．PCBPlate fully sealed protection process

6. Automatic compensation function improves the reliability of the detector

7. contact rating24V/500mA

3、 Technical parameters

1Operating voltage:DC24V±20%

2Working current: Monitoring current ≤100uAAlarm current:17mA±2mA

3Indicator light: red during inspectionLEDPeriodic flicker (approximately6s）Red in case of fire alarmLEDChang Liang

4Operating environment: Temperature-10℃～55℃ Relative humidity ≤95％RHNot condensing

5Color: beige

6Weight: Approximately100g(with base)

7. Execution standard:GB 4715-2005

1Installation method

The schematic diagram of detector installation is shown in the figure 3 As shown, the embedded box can be used86H50Type standard pre embedded box; During installation, mark the protrusion at the bottom of the detector accordinglyTX3987Rotate the raised mark on the base clockwise to install the detector on the base.

Photovoltaic smoke tester, smoke and fire recognition sensor, alarm

Product Name: High and Low Temperature Resistant Fire Smoke Detector

Product Model:JTY-GD-HA801-G

JTY-GD-HA801-GThe photoelectric smoke fire detector adopts a specially designed photoelectric sensor structure,SMDSurface mount processing technology production has the characteristics of high sensitivity, stability and reliability, low power consumption, beauty and durability, and easy use. The circuit and power supply can be self checked and simulated alarm testing can be performed

New high-performance sensors can effectively detect the occurrence of smoldering fires

The networked alarm adopts an intelligent microprocessor,Multiple fire model algorithms to prevent false alarms,The passive contact output of the relay can be set to normally open or normally closed. This detector is non coding type,Simply connect to a DC power supply during work to start working. During normal operation,The work indicator light is flashing. when calling the police,The alarm indicator light is on. The detector adopts a positioning base,The installation method available.

Product selling points

1Adopting microprocessor control for automatic reset/Power off reset is optional

2Intelligent Logic Control,Filter out various false alarms

3Industrial grade raw materials, low temperature resistance. Brushing the three proof paint process can effectively prevent moisture, salt spray corrosion, oxidation, and mold growth

4 Metal shielding cover, resistant to electromagnetic interference Strong environmental adaptability Dustproof, insect proof, and resistant to light interference