SA-6230 integrated piezoelectric vibration transmitter

NegotiableUpdate on 01/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The SA-6230 integrated piezoelectric vibration transmitter is based on the piezoelectric acceleration sensor and adds a built-in precision integration circuit, which can output vibration velocity or acceleration values. Can convert the vibration collected on site into a current signal of 4-20mA accordingly

Product Details

Technical Specifications

Supply voltage:12Vdc~30Vdc (loop power supply)

Measuring range:0-100mm/s or ± 100g

Output signal: two-wire output4-20mA (load 500 Ω)

Response frequency:3Hz-2000Hz

essenceDegree:<1.5%

Measurement direction: Any direction

Output mode: two-wire system

Ambient temperature-40℃～＋85℃

Shell material: stainless steel

heavyQuantity: 110 grams

Installation thread:M6 × 1 or magnetic suction seat (optional)

Piezoelectric materials:PZT-5
Install/Wiring

Installation: First, open aM6 mounting hole, connect the M6 screw at the bottom of the transmitter to the mounting hole and tighten it (if it is inconvenient to open the hole, magnetic suction seat can be used for installation);
Wiring: Red- Connect 4-20mA (positive); Black - connected to 4-20mA (negative).