TAKEX Microwave Radiation Detector

TAKEX Microwave Radiation Detector MW-50Infrared detectors are commonly used in perimeter defense systems. But when encountering harsh weather conditions such as heavy fog and rain, external conditions can affect the functionality of infrared detectors

Discounted greatly. In this case, the advantages of microwave detectors are highlighted. Microwave detectors can still reliably detect intruders in adverse weather conditions.

The MW-50 uses microwaves at 24.11/24.17 GHz, with one end transmitting and the other end receiving. The installation and use of infrared detectors are almost identical. The protection distance is 50 meters. In the rain

It can also work stably in harsh weather conditions such as snow, frost, and fog. Additionally, it will not be affected by flying birds, paper scraps, or other flying objects.

TAKEX Microwave Radiation Detector MW-50feature：

TakeX's microwave detectors are divided into two types: the "H" type and the "L" type, corresponding to the "L" and "H" types, respectively. When setting multiple units in a straight line, appropriate adjustments can avoidInterference with each other on the same frequency.

The four frequency switching infrared detector of TAKEX cannot receive the emitted infrared radiation even if it is close at hand when the transmission and reception frequencies are different. And the nominal50 metersWhen the (L) type microwave detector is connected in a straight lineImproper installation, within a range of 50 meters, the receiving end receives strong "H" frequency microwaves emitted by the transmitting end,This will cause false alarms for the detectors.This requires careful reading of the recommendations in the manual during installation and proper installation. Avoid interference.

Working voltage: 12V-30VDC, current consumption is 100mA.
Alarm output method: Relay output
Alarm signal: normally closed mode. Contact capacity: 30V 0.5A
Other features of TAKEX MW-50.
Built in indicator light
● Transmitter: Transmitting indicator light (green LED) When transmitting: illuminated
Receiver: Alarm indicator light (red LED). When an alarm occurs, it lights up
Installation method
Can be installed on walls or poles. Since it can be installed back-to-back on the pole, the warning line can be set at the same height,
And it does not affect the aesthetics.