TAKEX Outdoor Flame Detector

TAKEX Outdoor Flame DetectorFS-6000CEquipped with the appearance of a broadcasting horn, combined with a flame detector, it forms a fire alarm device of broadcasting alarm type. Its flame detection part uses a UV sensor that is sensitive to the UV band in open flames. It can detect flames up to 7 centimeters high within a 10 meter range within one second and send a relay output signal, similar to Japan's warning voice: "Open flames are strictly prohibited here, please extinguish the fire source immediately". Due to its sturdy shell and waterproof structure, it is currently widely used in coal mines, construction sites, ports, and docks. Enable people to prevent fire disasters in a timely manner.

TAKEX Outdoor Flame DetectorFS-6000CCharacteristics:

1. Long detection range: the detection range can reach 25 meters
Sensitivity can be selected from 40% to 100%. Reducing sensitivity is to minimize the impact of ultraviolet radiation in outdoor interference light.
3. Non polarized DC 12V voltage.
4. Relay output mode, allowing it to easily connect some necessary external facilities, such as sprinkler facilities.
5. Low current consumption, even when there is a horn alarm, the current consumption is only 500mA. When in standby mode, it is 35mA
6. Equipped with alarm memory. The function of the alarm memory is that during the initial alarm, the horn will sound an alarm, and the alarm indicator light will flash continuously for 3 minutes. If no one is handling it at this time, the alarm indicator light will
Switch to a constant light state and keep it on for 47 minutes. If no one handles it yet, the detector will automatically reset. If the fire continues during this process, the alarm light will flash continuously and the voice alarm will also continue.
7. Can work in an environment of minus 20 degrees Celsius.
The color of FS-6000C is black and can blend with most environments It can adjust the detection angle over a wide range and is suitable for different types of installation sites.