32A Explosion proof Mobile Cable Tray Non sparking AC Industrial Maintenance Power Panel

Product Features:32A Explosion proof Mobile Cable Tray Non sparking AC Industrial Maintenance Power Panel

1. The turntable and explosion-proof plug shell are made of cast aluminum alloy and coated with plastic on the surface;

2. Small circuit breakers with leakage protection can be installed inside;

3. There are opening and closing indicators on the plug, and the grounding contact on the plug is longer than the main contact. When inserting, the grounding plug is connected first, and when unplugging, the grounding contact is disconnected later;

4. The socket and plug are equipped with interlocking devices, and can only be plugged in and unplugged after power failure;

5. The cable reel rotates flexibly, with brackets and walking wheels for easy movement;

6. The standard configuration for cable length is 30 meters;

7. Cable routing.

Voltage: 220/380, current: 16/32, cable length: 30 meters/50 meters/100 meters

Installation and use:

1. Before installing and using the product, check whether the technical data on the nameplate matches the usage situation;

2. Before installation and maintenance, the front-end power supply must be cut off;

3. The incoming and outgoing cables pass through rubber sealing rings and are tightened with washers and compression nuts to ensure that the seals and cables are not loose;

4. If the sealing ring experiences corrosion, brittle cracking, deformation, sticking or hardness changes exceeding 20% of its original value during use, it should be promptly purchased and replaced from the manufacturer to ensure reliable explosion-proof performance;

5. During maintenance and disassembly, be careful not to bump, scratch, or corrode the explosion-proof surface, and regularly apply 204-1 anti rust oil;

6. Cable reels should be regularly inspected during use to ensure their proper functioning;

7. Non professionals are strictly prohibited from opening the cover for maintenance and inspection.

Maintenance requirements for explosion-proof inspection cable reels:32A Explosion proof Mobile Cable Tray Non sparking AC Industrial Maintenance Power Panel

1. Clean the oil stains on the surface of the cable reel and keep it clean;

2. When not in use, the cable should be wound into the reel in a timely manner to avoid dragging the ground for a long time, which may cause damage to the outer skin of the cable and easily lead to accidents such as leakage, resulting in unnecessary loss of life and property;

3. The cable reel plug should be coated with oil once a month to maintain the sealing of the plug, and the circuit breaker should be inspected for leakage opening and closing effect once a month. If there is any malfunction, it should be replaced immediately.

BXD-2/16A380V4 Core 5-Core Explosion proof Mobile Cable Tray Cable Tray

220v16A1 socket 3 * 2.5 square 30 meters

220v16A1 socket 3 * 2.5 square 50 meters

220v16A2 socket 3 * 2.5 square 30 meters

220v16A2 socket 3 * 2.5 square 50 meters

380v4 core 2.5 square 32A1 socket 30 meters

380v4 core 2.5 square 32A2 socket 50 meters

The BXD-P/16A/220V100m explosion-proof cable reel socket is a product developed by our company based on market demand. It can be used for repairing power sockets in flammable and explosive areas. The cable length can reach up to 100 meters, which can meet the needs of most areas. In factories, it is inevitable to encounter situations where there is no power supply during on-site construction or use of electrical equipment, but there is a distance of 100 meters from the power supply area. At this time, the BXD-P/16A/220V100m explosion-proof cable reel socket is needed. The cables are neatly wound together by a winding shaft, and the shaft is flexible. The explosion-proof cable reel is equipped with a push-pull handle, and there is a roller at the bottom with a standing balance bracket, which can be pushed to where it stands,

Technical parameters of explosion-proof mobile cable reel:

1. Explosion proof signs: Exde BT6, Exde BT4/5

2. Rated voltage: 220/380V

3. Rated current: 16 * 2, 32 * 2

4. Current with main switch: 32/63A

5. Protection level: IP54, IP65

6. Inlet and outlet threads: 3/4G, 1 1/4

7. Cable outer diameter: 10-14mm/18-22mm