-
E-mail
1686363322@qq.com
-
Phone
13868888594
-
Address
Liushi Town, Yueqing City, Wenzhou City, Zhejiang Province
Zhejiang Yamin Explosion proof Technology Co., Ltd
1686363322@qq.com
13868888594
Liushi Town, Yueqing City, Wenzhou City, Zhejiang Province
Since the beginning of summer, mosquitoes and flies have become natural enemies of humans, not only killing but also thriving in the summer breeze. For hundreds of years, the methods of killing mosquitoes and flies have been widely used. For example, deworming capsules, deworming sachets, deworming wristbands, etc., but in fact, there is no need to be so troublesome. Let's change our thinking. Perhaps a fly killing lamp is the more suitable choice for eliminating flies and mosquitoes.
UV explosion-proof fly killing lampThe principle of using light to lure insects and flies is to lure them closer to the fly killing lamp tube, so that the insects can come into contact with the high-voltage electric fence or fly paper near the fly killing lamp, electrocute or stick them, and achieve the goal of killing insects and flies.
Working principle of explosion-proof mosquito killer lamp:
Using flies The phototaxis of harmful flying insects such as mosquitoes is characterized by the use of mosquito traps that emit ultraviolet light of a specific wavelength (about 365nm) to lure them to fly onto the adhesive board and be stuck, allowing them to die naturally This device is an efficient and safe next-generation energy-saving and environmentally friendly mosquito killing device. Traditional mosquito killing products (high-voltage grid type) have the disadvantage of not being able to be used in hazardous areas such as natural and explosive environments and aquaculture
Power: 20W
Prevention and control area: 50 ㎡ -100 ㎡
Product Features:Industrial explosion-proof mosquito and fly killing lamp 20W fuel chemical food factory mosquito killing lamp
1. Adopting an iron sheet spray coating shell, the appearance looks exquisite and beautiful, corrosion-resistant, and easy to clean.
2. Using explosion-proof lamps, the product can be placed separately (in compliance with the safety standards of mosquito lamps).
4. Adopting a wall mounted, adhesive board, and mosquito trap concealed design, it is suitable for use in places with relatively few harmful insects such as mosquitoes and flies.
5. No noise, this product uses adhesive paper instead of traditional high-voltage power grids to capture harmful insects such as mosquitoes and flies, without producing noise.
6. Safe to use, no open flames, no high pressure This product is different from traditional methods that rely on high-voltage power grids to kill mosquitoes, as it does not generate sparks during mosquito eradication.
7. This product is made by combining adhesive paper with high-efficiency UVA explosion-proof mosquito attractant lamps. It does not contain chemicals or gases, is healthy and environmentally friendly, and will not cause secondary environmental pollution.
8. Easy to clean, just replace the mosquito paper every 30 days to clean mosquito debris, simple and hygienic operation.
9. Efficient, using efficient, safe, and environmentally friendly healthy UVA mosquito attractant tubes, the efficiency of attracting insects can be increased by 30%, and the service life of mosquito attractant tubes can reach more than 8 hours.

Technical Specifications:Industrial explosion-proof mosquito and fly killing lamp 20W fuel chemical food factory mosquito killing lamp
Compliant with standards: GB3836.1, GB3836.2, GB12476.1
Explosion proof mark: Exd II BT6 Gb, ExtD A21 IP54 T80 ℃
Rated voltage: AC220V
Assembly light source: 1 × 20W, (blue)
Protection level: IP54
Anti corrosion grade: WF1
Inlet specification: G1/2 ''
Applicable cable outer diameter: φ 6mm~φ 10mm
Placement area: 60-110 m2
Product dimensions: 765 × 70 × 65mm
Correct placement method:
1. Not easily susceptible to collisions between personnel and goods;
2. The installation location is equipped with a 24-hour uninterrupted power socket on the wall;
3. The best effect is achieved when the bottom of the fly killing lamp is 1.5-1.8 meters above the ground;
4. When the doors and windows are open, the installation position cannot be seen from outside;
5. Cannot be located in dusty, high-temperature, extremely cold, or areas with strong airflow;
6. In the dining area, it is not allowed to be close to the guest's dining table, dining table, salad bar, or other places with food;
7. It is not allowed to install equipment or vessels for food processing, cooking, packaging, or placement in the food processing area, and a horizontal distance of 1.5 meters or more should be maintained;
8. Not suitable for installation outdoors in direct sunlight or in close proximity to lighting sources;
9. A location that is not easily obstructed by inventory or decorations. Mosquito and Fly Lamp - Flying Insect Trap Lamp uses ultraviolet light to lure flying insects into the lamp and kill them. It mainly uses the adhesive board inside the lamp to kill them.



