ConST810 handheld fully automatic pressure calibrator

NegotiableUpdate on 02/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

ConST810 handheld fully automatic pressure calibrator features: built-in automatic pressure source, accuracy level up to 0.01; $r $n $r $n ■ can be replaced with rechargeable batteries and can be independently charged externally; $r $n $r $n ■ The internal pressure control module can be replaced, and the external pressure measurement module can be connected simultaneously;

Product Details

ConST810 handheld fully automatic pressure calibrator

Key Features:

Built in automatic pressure source, with an accuracy level of up to 0.01;

■ Can be replaced with rechargeable batteries and can be independently charged externally;

■ The internal pressure control module can be replaced, and the external pressure measurement module can be connected simultaneously;

Adopting innovative methods to automatically and quickly calibrate pressure switches;

Equipped with pollution prevention devices to ensure the smooth progress of work.

ConST810 handheld fully automatic pressure calibrator

康斯特ConST810 手持全自动压力校验仪

Product Selection

version model Features	Pneumatic version		Differential pressure version		Micro differential pressure version
	ConST810	ConST810-S	ConST810	ConST810-S	ConST810	ConST810-S
Automatic pressure occurrence range	(-0.085~2.5)MPa		(-85~250)kPa		±10kPa
Optional range of voltage control module	zui小 60kPa 0.01 level/0.02 level		zui小 ±10kPa 0.01 level/0.02 level		Zui small ± 500Pa 0.01 level/0.02 level
Control stability (30s)	<0.005%FS		<0.005%FS		<0.005%FS
Target pressure stable duration	>5min		>5min		>5min
Control response time	<40s		<20s		<30s
Pressure type	Gauge pressure (switchable absolute pressure)		differential pressure		differential pressure
External CDP module for measuring pressure	●	●	●	●	●	●
data storage	●	●	●	●	●	●
Task Management	●		●		●
HART function	●		●		●

1] The actual range of automatic pressure occurrence depends on the pressure control module; The range of occurrence of negative pressure is an indicator when the ambient atmospheric pressure is 100kPa. a;

[2] At least one CDPM pressure control module needs to be configured, which is replaceable. Please refer to the selection table for details;

[3] The stability of this control is based on the range of the pressure control module;

[4] When there is no additional load capacity and the measurement range is completed in 20% steps;

[5] Selection function: Based on an internal atmospheric pressure module, it can be used in conjunction with CDPM to achieve free switching between gauge pressure and absolute pressure. The internal atmospheric pressure module can be calibrated, with a measurement range of (60-110) kPa. a and an accuracy of ± 55Pa.

Electrical measurement indicators

project	scope	resolution	indicator
voltage measurement	(-30~30)V	0.1mV	±(0.01%RD+1.5mV)
current measurement	(-30~30)mA	0.1μA	±(0.01%RD+1.5μA)
Switch detection	Support mechanical and NPN/PNP digital
current output	(0~24)mA	1μA	±(0.01%RD+1.2μA)
24V output	Maximum load capacity of 50mA, ripple peak to peak value ≤ 40mV