Huamei Omes Rubber Insulation Board Manufacturer, Rubber Sheet

Huamei Omes Rubber Insulation Board Manufacturer, Rubber Sheet

Rubber insulation board has excellent fire and flame retardant effects.

Performance indicators of project units

Class I, Class II

Board Material Board Material

Apparent density Kg/m3 65-85 65-85

Combustion Performance - Grade B1 Grade B2

Oxygen index ≥ 32 Oxygen index ≥ 26

Smoke Density (SDR) ≤ 75 Smoke Density (SDR)-

thermal conductivity

(Average temperature in Celsius) W/m.k ≤ 0.038

Moisture permeability coefficient G/(m.spa) ≤ 4.4 * 10-10

Moisture resistance factor - ≥ 4.5 * 103

Vacuum water absorption rate% ≤ 10

Dimensional stability performance

(105+-3,7d) % ≤10

Tear strength N/cm ≥ 3.0 ≥ 3.0 ≥ 3.0 ≥ 3.0 ≥ 3.0

Compression rebound rate

Compression rate 50% compression time 72h% ≤ 70

Ozone resistance

(Ozone partial pressure 202Pa 200h) - No cracking

Aging resistance (150h) - slight wrinkling, no crack, no deformation

Unique advantages

·Closed bubble structure can effectively prevent heat conduction

·Thermal conductivity, not exceeding 0.034W/m · k at 0 ° C.

·High surface heat release coefficient, reaching 9W/m2k

·The insulation board has excellent resistance to water vapor penetration and a moisture resistance of ≥ 5000, forming a "built-in" waterproof layer, making it both an insulation layer and a moisture-proof layer as a whole

·Fire resistance and aerobic index above 32

·Easy and fast installation

·Free of CFC, HFC or HCFCs and other fluorinated materials, free of formaldehyde, dust and fibers

Huamei Omes Rubber Insulation Board Manufacturer, Rubber SheetDue to its high elasticity and softness, its installation is very convenient and fast. Material installation: It can be installed together after being fitted, or the material can be longitudinally cut and then bonded with aluminum foil tape. For complex components such as valves, tees, elbows, etc., the boards can be cut and wrapped in different shapes for bonding to ensure the tightness of the entire system, thereby ensuring the insulation of the entire system.

Rubber insulation is very safe to use. After SGS testing, the measured value is much lower than the EU's standard value for non-toxic substances. Its use is healthy and safe, and it will not irritate the skin or harm health. Green environmental protection does not produce waste, waste water, waste residue and other pollutants in the use of the project, and the flame retardancy is very good, which can effectively resist aging.

It is easy to construct, has a clean and beautiful appearance, and is pollution-free, making it a high-quality cross century new generation insulation material. Material standard length: 2 meters Board standard width: 0.5 meters, 1 meter.

1. The above specifications are commonly used specifications. If special specifications are required, they can be made according to user requirements.

2. The board and material are black, and special colors can be made according to user requirements.

3. It is recommended to use sheet metal when the outer diameter of the material exceeds 89mm.

4. Rubber insulation material needs to have a thickness exceeding 25mm and be packaged in multiple layers of overlapping until the required thickness is reached

When calculating the selling price of each unit, there is a price standard in the insulation industry, mainly based on the specifications of the product and the manufacturer's quotation. The specific formula is: (r+d) * π * d * manufacturer's quotation * length. Among them, r refers to the inner diameter of the rubber insulation, d refers to the thickness of the material, π is the pi, which can be roughly calculated as 3.14. Based on this formula, we can easily calculate the specific price of one piece. Assuming its inner diameter and thickness are both 1, the manufacturer's quotation is 1 yuan, and the length is 1 meter, then the price of one piece is (1+1) * 3.14 * 1 * 1=6.28 yuan. Of course, this is just an example given by the editor, and the actual price is not like this. It needs to be calculated based on the actual quotation, length, and product specifications.

The general thickness and length specifications for rubber insulation include 10mm/20m, 15mm/20m, 20mm/10m, 25mm/10m, and 30mm/10m. If there are special requirements, it is recommended to use sheet materials with an outer diameter exceeding 89mm. The insulation material needs to have a thickness exceeding 25mm and be packaged in multiple layers until the required thickness is reached. Common sheet materials and materials are mostly black, and special colors can be customized according to actual needs.

Rubber and plastic, foam glass, rubber and plastic board, rubber and plastic materials, thermal insulation materials, rubber and plastic board, rubber and plastic insulation have high elasticity, which can greatly reduce the vibration and resonance of chilled water and hot water pipes in use. At the same time, rubber insulation equipment has good flexibility and toughness, making it easy to handle curved and irregular material paths during construction, and can save labor and materials.

Easy installation and beautiful appearance

Due to its flexibility, this product is easy and convenient to install. Material installation: It can be installed together after being fitted, or the material can be longitudinally cut and then bonded with aluminum foil tape. For complex components such as valves, tees, elbows, etc., the boards can be cut and wrapped in different shapes for bonding to ensure the tightness of the entire system, thereby ensuring the insulation of the entire system. Moreover, due to the smooth and even rubber surface of this material, as well as its excellent performance, there is no need to add additional vapor barriers or protective layers, which reduces the trouble during construction and ensures a beautiful and smooth appearance. When the equipment or material is under maintenance, the stripped material can be reused without changing its performance.

Good seismic performance

Rubber insulation materials have high elasticity, which can minimize the vibration and resonance of chilled water and hot water materials during use.

Flexibility performance

Rubber and plastic materials have good flexibility and toughness, making it easy to handle curved and irregular material paths during construction, and can save labor and materials.

low thermal conductivity

Rubber has a low thermal conductivity, with an average temperature of 0.034w/mk at 0 ℃, and a high surface heat release coefficient of 9.5w/m2k. Therefore, under the same environmental conditions, its thickness is more than half thinner than other insulation materials, saving space above the ceiling and increasing the available space on the floor.