Shandong Omes Rubber Insulation Board Manufacturer, Rubber Sheet

Shandong Omes Rubber Insulation Board Manufacturer, Rubber Sheet

Rubber insulation board is widely used in many buildings nowadays. It has many excellent characteristics, such as shock resistance, insulation, waterproofing, anti-corrosion, fireproof, easy processing, etc., so it is often used as insulation material in buildings. But in addition to these characteristics, it also has an important advantage of having a certain sound insulation effect, so it can be used as a sound insulation material in many different places, and this can also be applied in insulation materials.

Rubber sheet manufacturers and insulation board manufacturers use rubber sheets not only to achieve good insulation and sound insulation effects, but also to achieve environmental protection and reduce resource consumption. At the same time, the products also have good flexibility.

The structure of rubber insulation board is a sealed bubble, so it is most suitable for insulation. Many industries have discovered this, such as pharmaceuticals or construction, and its price is relatively low. Therefore, they will purchase this product from rubber insulation board manufacturers in Hebei Province.

Rubber insulation board manufacturer and supplier Although it looks very soft, its insulation performance is quite good. Someone once conducted experiments by using some tools to scratch the rubber insulation board. After comparison, it was found that its performance has not decreased at all. Therefore, it is a product that many people trust. It is precisely because of this closed structure that the rubber insulation board can isolate water vapor and noise while maintaining insulation, without adding other materials, which is very labor-saving. The rubber insulation board from Kaishuo Rubber Insulation Board Manufacturer is worth choosing. Rubber insulation board manufacturers wholesale rubber insulation boards

Previously, many people questioned the thin appearance of rubber insulation boards and were concerned about their insulation properties. However, with the increasing popularity of use and experiments on heat conservation, everyone now recognizes it and has discovered that it has a more excellent function, which is flame retardancy

Shandong Omes Rubber Insulation Board Manufacturer, Rubber SheetTechnical indicators of rubber insulation board:

Foam rubber materials for thermal insulation and heat preservation of building engineering pipelines, with a combustion performance level of B1 for non combustible materials

Inspection Method

International Standard (GB8624+1997) Enterprise Execution Standard

Judgment index Combustion performance Judgment index Combustion performance

GB/T2406

GB/T8333

a) Oxygen index ≥ 32

b) Average combustion time ≤ 30s, average combustion height ≤ 250mm

c) Smoke density rating (SDR) ≤ 75, flame retardant B1 level a) Oxygen index ≥ 32.5

b) Average combustion time ≤ 30s, average combustion height ≤ 150mm

c) Smoke density rating (SDR) ≤ 73, flame retardant B1 level

GB/T2406

GB/T8332

a) Oxygen index ≥ 26

b) Average combustion time ≤ 90s, average range ≤ 50mm, flame retardant B2 level a) Oxygen index ≥ 28

b) Average combustion time ≤ 90s, average combustion range ≤ 45mm, flame retardant B2 level

Product Specifications

Board: Thickness (mm) 5-40

Pipe material: Wall thickness (mm) 5, 9, 10, 15, 20, 25, 30

Width (mm): 500-1200

Inner diameter (mm): 6-89

Length: (mm) typically 10000

Length: (mm) 1800-2000

According to user needs, our company can customize various other specifications.

Performance indicators of rubber insulation board

Performance indicators of project units

Class I, Class II

Plate tube plate tube

Apparent density kg/m3

65-85

40-110

Combustion Performance - Grade B1 Grade B2

Oxygen index ≥ 32 Oxygen index ≥ 26

Smoke Density (SDR) ≤ 75 Smoke Density (SDR)-

thermal conductivity

(Average temperature 0 ℃) w/(m.k)

≤0.038

≤0.042

Moisture permeability coefficient g/(m.spa)

≤4.4×10-10

Moisture resistance factor - ≥ 4.5 × 103

Vacuum water absorption rate% ≤ 10

Dimensional stability performance

(105℃±3℃,7d) % ≤10

Tear strength N/cm ≥ 3.0 ≥ 3.0 ≥ 3.0 ≥ 3.5

Compression rebound rate (compression rate 50%, compression time 72 hours)%

≥70

Ozone resistance (ozone partial pressure 202Pa 200h) - no cracking

Aging resistance (150h) - slight wrinkling, no crack, no deformation

Construction method of rubber insulation board:

1. Shake the container before use to make the glue evenly distributed. During actual installation, use a small can of glue to prevent it from evaporating too quickly. If necessary, pour the large can into the small can and seal the can mouth when not in use.

2. Use a short and hard brush to apply a thin and uniform layer of specialized adhesive to the bonding surface at both ends of the material.

3. The natural drying time of specialized adhesive is 3-10 minutes, which depends on the grade of the adhesive, the temperature and humidity of the atmosphere. Generally, the following principles should be followed: the higher the ambient temperature, the higher the relative humidity, the lower the medium temperature, and the thicker the material for larger pipe diameters; Exposure time exceeding 20 minutes is invalid.

4. When using, wait for the glue to dry naturally. The correct method for measuring dryness is the "finger touch method". Use your fingers to touch the adhesive surface. If the fingers do not stick to the material surface and there is no feeling of sticking to the material surface, you can proceed with bonding. When bonding, simply grip the two surfaces of the adhesive interface tightly for a while.

5. Normally, each kilogram of rubber adhesive can be applied to two square meters of bonding surface.

6. When connecting two materials under pressure, there is no need to wait for the glue to dry. The wet bonding method is used. First, place the materials at the installation site, apply glue to the interface of the materials, adjust the position of the two materials correctly, and soon they will be firmly bonded according to your designed position.

Company statement: Products with problems will never leave the factory

strictly control the quality

Company purpose; User * Reputation * Quality*

Company philosophy; Deliver the product to the customer's hands

Our company solemnly declares that:

1. Sign a product quality assurance certificate and promise that unqualified products will never leave the factory.

2. Provide product quality tracking services within two years and keep customer service records in archives for 20 years.

3. Due to product quality issues, our company will provide warranty, return, replacement, and meet customer requirements