Omes rubber insulation board manufacturer, wholesale rubber sheet materials

Omes rubber insulation board manufacturer, wholesale rubber sheet materials

Rubber insulation uses high-performance rubber and polyvinyl chloride as the main raw materials, combined with various high-quality auxiliary materials, and is a soft high-end insulation energy-saving material foamed by special processes, which does not contain chlorofluorocarbons.

Rubber insulation has excellent properties such as softness, bending resistance, cold resistance, heat resistance, flame retardancy, waterproofing, low thermal conductivity, shock absorption, and sound absorption. Can be widely used in industries such as air conditioning, construction, chemical, pharmaceutical, and textile;

The model of rubber insulation pipe is as follows: (DN13 DN16 DN19 DN22 DN25 DN27 DN32 DN43 DN48 DN57 DN76 DN89 DN108)

Thickness and dimensions of rubber insulation board: (9mm 10cm 13cm 15cm 18cm 20cm 23cm 25cm 28cm 30cm)

B1 grade rubber insulation board has a low thermal conductivity and closed cell structure, with long-lasting and good insulation effect; The material is isolated from water vapor, does not absorb water, does not condense, and has a long service life. After SGS testing, the actual measured value is much lower than the EU's standard value for non-toxic substances. It is safe and healthy to use; Soft and beautiful appearance, easy to bend, convenient and fast construction, and no need for other auxiliary materials.

Unique advantages

Closed bubble structure can effectively prevent heat conduction

Thermal conductivity, not exceeding 0.034W/m · k at 0 ° C.

High surface heat release coefficient, reaching 9W/m2k

The insulation board has excellent resistance to water vapor penetration and a moisture resistance of ≥ 5000, forming a "built-in" waterproof layer, making it both an insulation layer and a moisture-proof layer as a whole.

Fire resistance and aerobic index above 32

Easy and fast installation

Free of CFC, HFC or HCFCs and other fluorinated materials, free of formaldehyde, dust and fibers

Rubber insulation board has excellent fire resistance. According to the national standard GB/T17794-1999 "Classification Method for Combustion Performance of Building Materials", the rubber sponge insulation board has been tested and determined to be Class B1 flame-retardant material in GB/17794-1999. The temperature range for use is -50 ℃ to 110 ℃

Omes rubber insulation board manufacturer, wholesale rubber sheet materialsApplication field

·Air conditioning system refrigeration unit and equipment

·Freezing water pipe

·Condenser water pipe

·Air ducts and hot water pipelines

Specification and Model Table

Rubber sheet (1 meter wide)

厚度 10mm 13mm 15mm 18mm 20mm 23mm 25mm 28mm 30mm

米/件 20m 20m 20m 10m 10m 10m 10m 10m 10m

The thickness of the board is 13mm, 18mm, 23mm, and 28mm, which require large quantities for customized production.

Packaging method

Rubber insulation board adopts transparent packaging for intuitive products. It is convenient to accept OEM packaging for different brands according to customer requirements around the world

Technical Specifications

Performance indicators of project units

Level 0, Level I, Level II

Plate tube plate tube

Apparent density Kg/m3 65-70 60-65 60-65

Combustion Performance - Level 0, Level B1, Level B2

Oxygen index ≥ 40 Oxygen index ≥ 32 Oxygen index 28 ≥ 28

Smoke density ≤ 70 Smoke density (SDR) ≤ 75 Smoke density (SDR) - ≤ 75

thermal conductivity

(Average temperature in Celsius) W/m.k ≤ 0.034

Moisture permeability coefficient G/(m.spa) ≤ 10 × 10-10 ≤ 7 × 10-10 ≤ 4.5 × 10-10

Moisture resistance factor - ≤ 10 × 10-10 ≤ 7 × 10-10 ≤ 4.5 × 10-10

Vacuum water absorption rate% ≤ 10

Dimensional stability performance

（105+-3，7d） % ≤10

Tear strength N/cm ≥ 3.0

Compression rebound rate

Compression rate 50% compression time 72h% ≤ 70

Ozone resistance

(Ozone partial pressure 202Pa 200h) - No cracking

Aging resistance (150h) - slight wrinkling, no crack, no pinhole, no deformation