Maintenance free 100W factory LED explosion-proof light

What are the protective measures for LED explosion-proof lights?

The principle of LED explosion-proof lamp is the same as that of explosion-proof lamp, except that the lamp beads are LED beads, which are various specific lamps adopted to prevent ignition of surrounding explosive mixtures such as explosive dust environment, explosive gas environment, gas environment, etc. So what are the protective measures for LED explosion-proof lights?

In actual operation, LEDs have a current limit of 20mA, but the current often increases due to various reasons during use. If proper protective measures are not taken, the increased current will break down after a certain period of time and amplitude. For the protection of LEDs, the first step is to use a fuse tube. However, fuse tubes are disposable and have a very slow response time, which results in poor performance and is also very troublesome to use. Therefore, fuse tubes are not suitable for use in finished products such as LEDs. We can usually choose to automatically restore the fuse PTC, and through experiments, a more reliable method of use is to keep the PTC force heating the lamp beads further away. In practical circuits, we can choose two ways:

1. Branch protection: Generally, LEDs are divided into many series connected branches. For example, with a voltage of 24 volts, seven LED beads can be connected in series and then a resistor can be added to form a current of 17 to 19 milliamps. Depending on the needs, a multiple of seven beads can be selected to form a whole lamp. A PTC element is added in front of each branch for protection. The advantage of this method is that the reliability and accuracy of protection are relatively good. 2. Overall protection: Connect a PTC component in front of all lamp beads to protect the entire lamp. This method is relatively simple and does not take up space. This method is quite satisfactory for household products.

Maintenance free 100W factory LED explosion-proof lightProduct Features:

Adopting imported chips and optimized LED packaging structure, achieving advantages such as low light decay, high light efficiency, energy conservation, and environmental protection

Key components of the power supply are used to ensure the service life of the lighting fixtures;

Using crystal lenses for light distribution to meet the lighting needs of different occasions

Adopting a transparent structural design and optimizing the heat dissipation structure can ensure the lifespan of the lighting fixtures

The lamp adopts an angle locking device, which can ensure that the angle does not change even in a vibrating environment for a long time;

The lamp body is made of lightweight alloy material, with special sealing and surface coating treatment to ensure that the lamp can withstand harsh conditions such as humidity and high temperature

Technical Specifications:

Rated voltage: AC220V 50Hz (please specify if other voltages are required).

Rated power: 80W, 100W, 120W, 150W, 180W, 200W, 220W

Equipped with light source: LED

Explosion proof mark: Exd IIC T4 Gb

Protection level: IP66

Anti corrosion grade: WF2

Incoming thread: G3/4

Cable introduction: 6-8mm

Applicable height: 6M-15M

Installation methods: ceiling type (x), wall type 30 (b1), wall type 90 (b2), suspension rod type (g), guardrail type (h), flange type (f).

Maintenance free 100W factory LED explosion-proof lightFeatures:

Using high-efficiency and long-life gas discharge lamps as the light source, and through the light distribution design and special process treatment, the light is soft, uniform, and glare free, with an average service life of over 10000 hours.

Adopting optimized structural design and high-strength aluminum alloy shell, it has the ability to resist strong vibrations and impacts.

High tech surface spraying technology ensures that the lamps do not corrode or rust when used in harsh environments.

Adopting a split structure design makes it more convenient and safe to replace light bulbs and maintain lighting fixtures.

Multiple installation methods such as lamp posts, ceilings, and suspension rods can meet the lighting needs of different environments.