Manufacturers produce biomass burners that are energy-saving, smokeless, and do not backfire

Manufacturers produce biomass burners that are energy-saving, smokeless, and do not backfire

1.Personnel operating boilers should undergo professional training and obtain operating certificates;
2.Boiler installation or renovation must be carried out by a qualified company and obtain a usage license;
3.Before preparing for use, the boiler must undergo a single machine trial run and a detailed understanding of the characteristics and operating instructions of the boiler and combustion engine;
4.The boiler is prohibited from using beyond the design specifications and the normal operation of safety protection settings is forcibly restricted
Make;
5.Installation, use, maintenance, and upkeep must be carried out in accordance with the corresponding national regulations;
6.Boiler equipment must have a dedicated person on duty during operation;
7.The appearance of the combustion engine should be regularly cleaned of surface wood dust after use to avoid ignition and fire;
8.The blowing blades of the air supply fan should be regularly cleaned with high-pressure air to avoid long-term accumulation of dust affecting the air supply volume or causing noise;
9.The feeding bearing should be regularly lubricated with butter to ensure that the bearing lubrication does not get stuck;
10.If the oil igniter fails to ignite repeatedly, it should stop ignition and wait for the ignition system to be repaired before reigniting to avoid excessive diesel accumulation in the furnace;
11.The inner pipe of the fire outlet may cause a certain degree of coking after a certain period of use. Please regularly disassemble the inner pipe for cleaning;
12.This biomass burner design is only applicable to pure wood pellet fuel. Do not use other materials of fuel to ensure the normal operation of the unit.

Manufacturers produce biomass burners that are energy-saving, smokeless, and do not backfire

1、 Before starting the combustion engine, clean the carbon deposits on the furnace bridge and bottom, add granular fuel, close the material box cover, and open the isolation valve;

2、 Turn on the power supply of the device, check if the circuit and water pipes are normal, and check if the cooling water tank has enough water. Open the cooling water inlet and outlet valves of the combustion engine and confirm that the interlayer cooling water of the high-temperature combustion chamber is filled;

3、 Adjust the air supply level to a lower level, add an appropriate amount of bottom material, start the ignition officially, gently open the furnace door to supply air appropriately, close the furnace door, start the feeding system, and gradually increase the air supply level to an appropriate level. The feeding speed and air volume should gradually increase, and should not be accelerated too fast2-3Minute time to allow the furnace temperature to rise normally.

The invention of a biomass burner relates to a burner, specifically a biomass semi gasification automatic control burner. The biomass burner is developed specifically for the needs of harvesting and slow heating. It uses abundant crop straw such as corn stalks from rural areas as materials, which are pressed into uniformly shaped and sized granular fuels through molding equipment. Then, they are efficiently incinerated and converted into heat energy through a fully active granular incinerator that is shared in the process. The heat generated from incineration is absorbed by the circulating water in the boiler.