Vibration frequency measuring instrument

The vibration frequency meter is developed for measuring the working frequency of various machinery and equipment, which can measure the vibration frequency of general machinery and equipment, as well as equipment with high precision requirements. The instrument is composed of integrated circuits and high-sensitivity sensors, which have high reliability, low power consumption, and resistanceThe characteristic of strong strength. The instrument adopts an ABS handheld chassis and battery power supply, with LCD mode displaying frequency values and undervoltage, making operation simple and intuitive. The successful development of this instrument will greatly facilitate the on-site testing and calibration of machine equipment by testers.

ZYPLVibration frequency measuring instrumenttechnical indicators

1. Frequency range: 3.0Hz-10000.0Hz (-3dB)

The frequency range is determined by the user

2. Measurement range: 0.5-100g (acceleration)

4. Working power supply: 5 AA 1.5x5 batteries

5. Environmental conditions: working temperature 0 ℃ -50 ℃

6. Dimensions: 180 * 100 * 40mm

7. Weight: 430g

ZYPLVibration frequency measuring instrumentOperation Manual

1. Vertically attach the magnetic suction seat at the bottom of the sensor to the device under test. When installing sensors, the surface of the base should be perpendicular to the vibration of the equipment. The sensor output line is connected to the host.

2. Turn the power switch to the "on" position, and it will be detected after 2 seconds.

3. When the "" indicator light on the display window is on, it indicates that the battery voltage is lower than the normal operating voltage, and the battery should be replaced in a timely manner (working current<10mA).

Precautions

1. Avoid hitting or knocking the sensor during use. The connection with the wire should not be twisted or pulled from the root.

2. The frequency range is also a filter. The frequency range is used to resist external interference. Choosing appropriate upper and lower frequency values can cause significant changes in the digital values of the frequency table.

3. Do not use gasoline or rubber water to clean the instrument.

4. When the instrument is not in use for a long time, remove the battery from the battery compartment behind the instrument to avoid battery damage.

5. When the instrument displays errors during the measurement process, consideration should be given to whether the battery is under voltage or whether the sensor is damaged.

Appendix:

The VT700/VT800 dynamic balance measuring instrument is aimed at domestic and foreign high-tech, using large-scale integrated circuit and microcontroller technology. This instrument has multifunctionality and can be used as both a tachometer and a vibration test. It can be used for both time-domain analysis and frequency-domain analysis. Especially with all the functions of measuring dynamic balance.

The instrument is easy to operate, with human-machine dialogue, menu prompts, and measurement data that can be locked and maintained at any time. The VT dynamic balancer has a compact and lightweight structure, with the keyboard and display screen on the panel, and input/output sockets and various control switches placed on the panel. The VT700 dynamic balancing instrument can perform on-site dynamic balancing of various rotating machinery,. Equivalent to a movable dynamic balancing machine. It is exquisitely designed and easy to carry, with the entire instrument housed in a portable instrument box.

Technical parameters of VT700 dynamic balance measuring instrument

１. General measurement:

Speed measurement: 30-30000 rpm

Ordinary vibration measurement: 0.1-5000 μ m (peak to peak)

0.1-2000mm/s (effective value)

Vibration analysis: FFT spectrum analysis

Display mode: Dot matrix graphic 64X240 Dot matrix graphic LCD Chinese dish

Keyboard: Eight keys

２. Dynamic balance measurement:

Measurement points: single measurement point or single-sided dual measurement point or double-sided

Same frequency working speed: 600-30000 rpm

Same frequency amplitude range: 0.1-5000 μ m (peak to peak)

Vibration intensity range: 0.1-2000mm/s (effective value)

Phase accuracy: 0-360 °± 1 °

Unbalance removal rate: ≥ 85%