Artificial board comprehensive performance tester

Artificial board comprehensive performance tester

CSI-F1028Integrated artificial boardperformancetester/Universal Mechanics Testing Machine

1Introduction‌

As a core material in furniture manufacturing, building decoration and other fields, the quality of artificial boards directly affects the safety and durability of end products. The comprehensive testing instrument for artificial boards is designed to meet the multidimensional testing needs of boards, integrating full chain testing functions such as mechanical properties and environmental indicators. It is a professional equipment developed by quality control, quality inspection agencies, and scientific research units for board enterprises, providing accurate and efficient testing solutions for quality control of artificial boards.

2、 Key parameters‌

IIIexecuteStandards and Applicable Scenarios‌

Compliant with standards:

strictly followThe test items of GB/T 17657-2022 are as follows:

Determination of static flexural strength and elastic modulus--Three-point bending method

Determination of static flexural strength and elastic modulus--Four point bending method

Determination of static bending strength--Immersion treatment method

Determination of static bending strength--Immersion freezing drying treatment method

Determination of internal bonding strength

Determination of internal bonding strength--2-hour boiling water method

Moisture resistance test--Boiling drying method

Moisture resistance test--Cyclic method

Determination of surface bonding strength--Method 1

Determination of surface bonding strengthMethod 2

Determination of bonding strength

Determination of Shear Strength of Adhesive Layer

Determination of peel resistance

Measurement of screw grip force

Tensile strength determination

Determination of longitudinal compressive strength

Typical applications:

This equipment can be widely used in the factory quality inspection process of various artificial board production enterprises such as particleboard, fiberboard, plywood, particleboard, and decorative artificial board, to ensure that product performance indicators meet relevant industry standards; At the same time, it can meet the quality supervision needs of third-party quality inspection agencies for the artificial board market, providing authoritative testing data support for product quality evaluation in the market; In addition, it can also serve as a key experimental device for higher education institutions and research institutes to conduct research on the mechanical properties of artificial board materials, providing technical support for the development and performance optimization of new artificial board materials.

4、 Operation process

1. Power on preparation: Connect the device power supply, confirm that the power supply voltage is AC220V 50Hz, check if the emergency stop button is in the normal release state, turn on the industrial control integrated computer, and wait for the system to start up to the operation interface.

2. Sample clamping: Select an appropriate fixture based on the test items (such as static bending strength, internal bonding strength, etc.), fix the prepared standard artificial board sample on the fixture in the direction and position required by the execution standard, ensure that the sample clamping is firm and does not generate additional stress, and adjust the fixture spacing to the appropriate position through the test bench lifting device.

3. Program settings: Select the corresponding test program on the color 12 inch touch control interface. If you need to customize parameters, you can modify key parameters such as test range, force loading speed, and test speed. After setting, save and call the program.

4. Test execution: After confirming that the sample clamping and parameter settings are correct, click the "Start Test" button. The equipment will automatically load, collect data, and control the process according to the preset program, and display real-time test data and curves such as force values, displacement, deformation, etc. on the interface.

5. Data processing: After the test is completed, the device automatically stops loading, and the test bench can choose to manually or automatically return to the initial position. The system automatically calculates and displays the test results (such as strength values, modulus values, etc.), supports printing test reports through WiFi connected printers, and can also export data to storage devices.

6. Shutdown cleaning: After the test is completed, turn off the industrial control integrated computer, disconnect the main power supply of the equipment, clean the surface of the fixture of any remaining debris, check whether all components of the equipment are in normal condition, and keep a record of the equipment usage.

5、 Configuration List

host1 unit;

Instruction Manual1 copy;

Certificate of Conformity1 copy;

Warranty Card1 copy;

Delivery Receipt1 copy;

nameplate1 piece;

power cord1 piece;

wrench1 set;

Several brochures;

6、 EquipmentMaintenance and upkeep:

To ensure long-term stable operation of the equipment, it is necessary to regularly clean the host, remove surface dust and debris; Check the power cord connection for firmness and any damage every month; Add specialized lubricating oil to power components such as servo motors and ball screws every quarter to reduce mechanical wear; Regularly calibrate force sensors and displacement measurement systems to ensure the accuracy of detection data; After using the fixture, it should be cleaned in a timely manner to avoid residual sample debris affecting the accuracy of the next clamping. When storing, anti rust oil should be applied and placed in a dry and ventilated place. If abnormal noise or data fluctuations are found during daily use, the machine should be stopped immediately for inspection, and professional personnel should be contacted for handling. It is strictly prohibited to disassemble the core components of the equipment without authorization.

7Software Features:

A.Test standard modular functionalityProvide users with testing settings for the required applications, covering testing standards and specifications such as GB, ASTM, DIN, JIS, BS, etc.

B.Sample dataProvide users with the ability to set all sample data for repeated use with a single input. And the formula can be self modified to improve the test data.

C.Dual report editingWan fully open user editing reports, allowing testers to choose their preferred report format (the testing program has added built-in EXCEL report functionality, expanding the previous single professional report format)

D.The lengths, force units, and display digits are dynamically interchanged, with force units usedT、Kg、N、KN、g、lb， The length units are mm, cm, and inch.

E.Automation of Graph Curve Scale(Auto Scale)， Can display graphics at scale. And it can dynamically switch graphics in real-time during testing. It has load displacement, load time, displacement time, stress-strain load-2 point extension diagrams, as well as multi curve comparisons.

F.The test results are acceptableOutput data in EXCEL format.

G.After the test is completed, it can be manually archived,

H.The software has the function of demonstrating historical test data.