-
E-mail
671113565@qq.com
-
Phone
13761235453
-
Address
No. 265 East Street, Zhuangxing Town, Fengxian District, Shanghai
Product Categories
Shanghai Chengsi Intelligent Technology Co., Ltd
Artificial board sliding friction coefficient tester
NegotiableUpdate on 01/29
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The sliding friction coefficient tester for artificial boards is a professional equipment used to measure the surface sliding friction coefficient of artificial boards, widely used in the fields of artificial board production, scientific research, and quality inspection.
Product Details
CSI-NM1117Artificial board sliding friction coefficient tester
1Introduction
Artificial board sliding friction coefficient testerIt is a professional equipment used to measure the sliding friction coefficient on the surface of artificial boards, widely used in the fields of artificial board production, scientific research, and quality inspection.
working principle
Using a force transmission device to apply a constant torque to the rotating shaft, driving the test bench base, the software automatically collects test data to measure and calculate the sliding friction coefficient
2、 Key parameters
Parameter items |
Specifications |
control system |
industrial-gradePLC |
operating interface |
colorful7-inch touch screen, switching between Chinese and English |
Operation method |
Full touch operation, capable of setting, calling, and modifying test programs |
printer |
Embedded printer |
Torque sensor |
0N · cm~4000N · cm (adjustable) accuracy ± 20N · cm resolution 0.01N · cm (optional with other accuracies) |
lifting height |
Adjustable from 10mm to 300mm |
Test time |
0s-999999s can be set |
Twist direction |
Clockwise and counterclockwise |
Load weights |
2.5 kg, 5 kg, and 10 kg each |
Drive Type |
Servo motor driven friction rotating shaft |
turntable diameter |
100mm |
Wheel friction foot |
Material: Rubber soleShore hardness: D60, specifications: approximately length X width X thickness of 2mmX2 mmX5 mm, density: 1.04 g/cm |
Sample Specifications |
long(450 ± 5) mm; Width (450 ± 5) mm (optional with other sizes) |
test point |
Samples can be selected for testing at different locations |
Overall dimensions |
Whole machine approximately800x700x1550mm(L*D*H) |
heavy quantity |
about350kg |
security configuration |
Emergency stop button, overload protection |
power supply voltage |
AC220V 50Hz |
USB testing software socket, capable of reading data and connecting to a computer | |
IIIexecuteStandards and Applicable Scenarios
Compliant with standards:
strictly followThe test items of GB/T 17657-2022 are as follows:
Measurement of sliding friction coefficient
Typical applications:
1. Factory quality inspection of artificial board production enterprises.
2. Performance verification of decorative artificial boards.
3. Material research and development in scientific research institutions and universities.
4. Compliance testing by third-party quality inspection agencies.
5. Incoming material inspection for furniture manufacturing enterprises.
4、 Operation process
1Start the tester, and the friction head drives the sample to slide uniformly in a straight line along the surface of the paired material.
2During the experiment, observe the operation status of the instrument. If there are any abnormal situations such as sample deviation or fixture loosening, the experiment should be stopped immediately, and the sample should be reinstalled before testing.
3Repeat testing for each sample3 times, clean the surface of the paired materials after each test to avoid residual debris affecting subsequent test results.
4complete After testing all three samples, save all test data
5、 Configuration List
host1 unit;
Instruction Manual1 copy;
Certificate of Conformity1 copy;
Warranty Card1 copy;
Delivery Receipt1 copy;
nameplate1 piece;
power cord1 piece;
wrench1 set;
Several brochures;
Similar Product Recommend
