Proximity switch GY-2430A/S8 GB | T14048.10 sensing type

Proximity switch GY-2430A/S8 GB | T14048.10 sensing typeUsed for detection, positioning, counting, etc. in high temperature and harsh environments. High temperature resistant proximity switches can operate stably in environments ranging from -40 to+200 ℃, and are widely used in high-temperature automation control fields such as power plants, steel plants, metallurgy, casting, cement plants, and mines. Belonging to a type of position switch, it can be opened or closed without direct contact with some moving parts during operation. For example, if the distance of an object falls within the specified distance range that the proximity switch can sense, then we do not need to apply any pressure to the proximity switch. The switch will directly open because the driving DC device or its computer device of the proximity switch can provide a command for the opening and closing operation of the switch. Because sensors are installed inside the proximity switch, there is no need to manually click or touch the switch, and the corresponding operation can be automatically performed. At the same time, it can ensure a very stable opening and closing operation, and the performance is also very stable. It can also respond to the operation in a very short time, and the service life is also very long.

The proximity switch GY-2430A/S8 can operate the position switch. When an object approaches the sensing switch surface at a certain distance, it does not require mechanical contact or any pressure to activate the switch, thereby driving DC power or providing control instructions to the computer (PLC) device. A proximity switch is a type of switch type sensor (i.e. contactless switch) that has both the characteristics of a travel switch and the performance of a sensor. It has stable and reliable performance, fast frequency response, long service life, strong anti-interference ability, and is waterproof, corrosion-resistant, and shockproof.

Proximity switch GY-2430A/S8 GB | T14048.10 Technical parameters:

1. Integrated design of amplification circuit

2. All internal components are made of imported parts,

3. Can be applied in harsh environments up to 150 ℃

4. Long service life and high reliability,

5. Surge, overload, reverse polarity protection function

6. Waterproof rating: IP67, suitable for use in water

7. Installation method: embedded, non embedded

8. Detection distance: adjustable (unit: mm)

9. Output mode: NPN/PNPNO/NC

10. Power supply voltage: 10-30VDC, AC220V

11. Exterior specifications: M12/M18/M30 * 1 * 51mm

12. Environmental temperature: -25... 150 ℃

13. Shell material: nickel copper alloy

14. Connection method: 2m silicone cable

Proximity switch feature:

① Due to the non-contact detection method, there will be no wear or damage to the detection object. ② Due to the use of contactless output, the lifespan is extended (except for magnetic type). Semiconductor output is used, which has no impact on the lifespan of the docking point.

③ Unlike light detection methods, it is suitable for use in environments such as water and oil, and is almost unaffected by stains, oil, and water on the detection object. In addition, it also includes PTFE shell type and products with good high temperature resistance

④ Compared with contact switches, it can achieve high-speed response

⑤ Can correspond to a wide temperature range

⑥ It is not affected by the color of the detected object and detects changes in its physical properties, so it is almost unaffected by surface effects.

⑦ Unlike contact sensors, it is affected by the surrounding temperature, objects, and similar sensors, including color sensitivity. Therefore, when setting up sensors, mutual interference needs to be considered. In addition, in the inductive type, the influence of surrounding metals needs to be taken into account, while in the electrostatic capacitance type, the influence of surrounding objects needs to be considered.

The working voltage of the proximity switch is 10-30VDC for DC and 90-250VAC for AC, with a large output capacity of 200-400mA and small voltage drop. The working power indicator uses LED with high brightness. The product has a protection level of IP67 and can be used normally in humid environments. The product has polarity protection function and strong applicability.

Most proximity switches have leads of different lengths for the same product, and customers can choose the corresponding model based on their lead length requirements. Our company's products have good waterproof and oil resistant effects, high and low temperature resistance, and are compact, beautiful and practical. The models of proximity switches are:

Detecting metal proximity switches
Detecting aluminum M18 inductive proximity switch
Communication 3-wire M18 long-distance metal proximity switch
AC/DC converter type proximity switch
M5 connector M4 ultra small proximity sensor
M12 DC 2-wire 3-wire proximity sensor proximity switch
AC/DC converter type proximity switch
AC/DC converter type proximity switch
Inductive proximity sensor price
AC photoelectric switch
Diameter 12/18/30mm ultra short proximity switch
M8 proximity sensor
6-12VDC explosion-proof proximity switch
NAMUR explosion-proof proximity sensor
Infrared sensing diffuse reflection photoelectric switch
NPN/PNP output normally open/normally closed proximity switch
DC two-wire M8 long-distance metal proximity sensor
M12 distance enhanced proximity switch
Long distance detection plastic proximity switch
Capacitive sensor
M30 Square Capacitive Proximity Sensor
Q50 photoelectric sensor,